TEN Automotive Equipment Limited
15
Version 3.4
Sept 2014
2
1.
Press CHARGE key to enter into
refrigerant recharging procedure.
2.
Use value keys to set the weight of
the refrigerant needed to be
recharged to vehicle A/C system.
CHARGE 00.90kg
3
Select charging port. For low pressure
charge (default) press START to
confirm, or press “up” or “down” keys
(
▲
or
▼
) to select high and/or low
pressure charge port mode.
LP CHARGE
4
After selecting high and/or low pressure
charge mode, press START to confirm.
LP. HP CHARGE
5
Press START to begin the
refrigerant recharging procedure.
CHARGE 00.00kg
6
When refrigerant recharging reaches the
set value weight the System will stop
automatically and indicates the charge
amount result at the same time.
CHARGE xx.xx kg
CHARGE COMPLETE
7
Press the STOP key for 3 seconds to end the
recharging process and return to System
Standby.
Start the Vehicle A/C system; check the high
and low pressure gauges to see if the readings
are normal.
Close “quick coupler” valves and
recover refrigerant from hoses.
Disconnect high and low quick
couplers.
IMPORTANT
: Do not exit the
program or press stop during hose
refrigerant recovery procedure.
WEIGHT xx.xx kg