60
8.2.5
Static Navigation (ID=1003)
When static navigation is enabled, FM3620 filters out GPS jumps, when it is not moving.
When it is disabled, it does not make any changes to collected GPS data.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
1
1
U8
8.2.6
Ignition Source (ID=1004)
Ignition Source sets ignition triggered functionalities.
Parameter
ID
Value
Ignition Source
1004
0 (By Power Voltage – default)
1 (By Ignition Din1)
2 (By Movement sensor)
High Voltage Level*
1005
Min: 0, Max: 30000 (mV)
Low Voltage Level*
1006
Min: 0, Max: 30000 (mV)
* - used when External voltage selected as ignition source.
8.2.7
GNSS FIX Timeout for Time Synchronization via NTP (ID=1007)
If “GNSS FIX Timeout” is set too 60s (default value) and during this time GPS FIX is received
– use default (GNSS) time synchronization method. However if the GPS time FIX is not received:
a. FM is going to get time using NTP server. Device will activate GPRS context and create UDP
connection to destination port 123 using SNTP protocol.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
65535
60
U8
8.2.8
Saving/Sending without time synchronization (ID=201)
When this feature is enabled (value = 1), then records can be saved and sent to server
without time synchronization.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
1
1
U8
8.2.9
GNSS System (ID=202)
This parameter sets Satellite System, available values: 0 – GNSS (all available); 1 – GPS only;
2 – GLONASS only.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
2
0
U8