HE863 family AT commands reference guide
80377ST10083a Rev.6 – 2012-11-12
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved.
Page 75 of 229
+CPBS - Select Phonebook Memory Storage
“AP” -
Selected application phonebook.
“BN” – SIM/USIM
barred-dialling-number phonebook (only valid with PIN2)
“SN” – SIM/USIM
service-dialling-number phonebook
<password>
string type value representing the PIN2-code required when selecting
PIN2-code locked
AT+CPBS?
Read command returns the actual values of the parameter
<storage>
, the number of
occupied records
<used>
and the maximum index number
<total>
, in the format:
+CPBS: <storage>
,
<used>
,
<total>
Where:
<storage>
s above
<used>
integer type value indicating the number of used locations in selected
memory
<total>
integer type value indicating the total number of locations in selected
memory
AT+CPBS=?
Test command
returns the supported range of values for the parameters
<storage>
.
This response is different according to the range supported by each USIM.
Example
AT+CPBS=”SM” //
current phonebook storage is SIM
AT+CPBR=1
+CPBR: 1,"0105872928",129,"James"
OK
Reference
3GPP TS 27.007
3.5.3.4.6.
Read Phonebook Entries - +CPBR
+CPBR - Read Phonebook Entries
AT+CPBR=
<index1>
[,<index2>]
This execution command returns phonebook entries in location number range
<index1> <index2>
from the
current phonebook memory storage selected with +CPBS. If
<index2>
is left out,
only location
<index1>
is
returned.
Note
: Wildcard chracters (*, ?) in the phone number of FDN (fixed number
phonebook) are allowed.
Parameters:
<index1>, <index2>
integer type values in the range of location numbers of
phonebook memory
Response syntax:
[+CPBR:
<index1>,<number>,<type>,<text>[,<hidden>][,<group>][,<adnumber>][,<a
dtype>][,<secondtext>][,<email>]]
[[...]
<CR><LF>+CPBR: <index2>,<number>,<type>,<text>[,<hidden>]
[,<group>][,<adnumber>][,<adtype>][,<secondtext>][,<email>]]]
