Telit Wireless Solutions HE863 Series, At Commands Reference Manual

Page: 24 / 229

HE863 family AT commands reference guide
80377ST10083a Rev.6 – 2012-11-12
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 24 of 229
3.4. AT Commands Availability Table
The following table lists the AT commands set and matches the availability of every single
command versus the Telit wireless module family.
COMMAND
HE863-EUD
HE863-NAD
HE863-AUD HE863-EUR
HE863-NAR
HE863-AUR HE863-EUG
HE863-NAG
HE863-AUG
Function
Command Line General Format – Command Line Prefixes
AT
  
Starting A Command Line
A/    Last Command Automatic Repetition Prefix
Hayes AT Commands – Generic Modem Control
&F    Set To Factory-Defined Configuration
Z
  
Soft Reset
+FCLASS Select Active Service Class
&Y
  
Designate A Default Reset Basic Profile
&P
  
Designate A Default Reset Full Profile
&W
  
Store Current Configuration
+GMI
  
Manufacturer Identification
+GMM    Model Identification
+GMR
  
Revision Identification
+GCAP    Capabilities List
+GSN
  
Serial Number
%L    Line Signal Level
%Q
  
Line Quality
Hayes AT Commands – DTE-Modem Interface Control
E
  
Command Echo
Q
  
Quiet Result Codes
V
  
Response Format
X
  
Extended Result Codes
+IPR    Fixed DTE Interface Rate
&C
  
Data Carrier Detect (DCD) Control
&D    Data Terminal Ready (DTR) Control
&S
  
Data Set Ready (DSR) Control
\R    Ring (RI) Control
Hayes AT Commands – Call Control
D   Dial
A
 
Answer
H   Disconnect
&G
  
Guard Tone
&Q
  
Sync/Async Mode
Hayes AT Commands – Modulation Control
+MS    Modulation Selection
%E
  
Line Quality Monitor And Auto Retrain Or Fallback/Fallforward
Hayes AT Commands – S Parameters
S0
 
Number Of Rings To Auto Answer
ETSI GSM 07.07.27.007 – General
+CGMI
  
Request Manufacturer Identification
+CGMM
  
Request Model Identification
+CGMR    Request Revision Identification
+CGSN
  
Request Product Serial Number Identification
+CSCS    Select TE Character Set
+CIMI
  
Request International Mobile Subscriber Identity (IMSI)
ETSI GSM 07.07/27.007 – Call Control
+CHUP
 
Hang Up Call
+CSTA   Select type of address
+CBST
 
Select Bearer Service Type
+CRLP    Radio Link Protocol