HE863 family AT commands reference guide
80377ST10083a Rev.6 – 2012-11-12
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved.
Page 53 of 229
3.5.3.3.2.
Read Operator Names - +COPN
+COPN - Read Operator Names
AT+COPN
Execution command returns the list of operator names from the
ME
in the format:
+COPN: <numeric1>,<alpha1>[<CR><LF>
+COPN: <numeric2>,<alpha2>[…]]
where:
<numericn>
- string type, operator in numeric format (see
+COPS
)
<alphan>
- string type, operator in long alphanumeric format (see
+COPS
)
Note: each operator code
<numericn>
that has an alphanumeric equivalent
<alphan>
in the ME memory is returned
AT+COPN=?
Test command returns the
OK
result code
Reference
3GPP TS 27.007
3.5.3.3.3.
Network Registration Report - +CREG
+CREG - Network Registration Report
AT+CREG=
[<mode>]
Set command enables/disables network registration reports depending on the
parameter
<mode>
.
Parameter:
<mode>
0 - disable network registration unsolicited result code (factory default)
1 - enable network registration unsolicited result code
2 - enable network registration unsolicited result code with network Cell
identification data
If
<mode>=1
, network registration result code reports:
+CREG: <stat>
where
<stat>
0 - not registered, ME is not currently searching a new operator to register to
1 - registered, home network
2 - not registered, but ME is currently searching a new operator to register to
3 - registration denied
4 -unknown
5 - registered, roaming
If
<mode>=2
, network registration result code reports:
+CREG: <stat>[
,
<Lac>
,
<Ci>]
where:
<Lac>
- Local Area Code for the currently registered on cell
