TG-7 Dual Path Series Installation & Operating Guide
22
56052601 Rev B © 2022 Telguard
UL/ULC Compliance Note:
The trip input feature shall only be used for supplementary signaling.
Initiating zones shall not be connected to the trip input.
Step 7: Connect Tamper Switch (optional in fire-only systems/required for burg)
The TG-7E requires a tamper switch be connected; it is optional on the TG-7FE. Note that the
tamper switch will not connect to the circuit board of the communicator.
Mandatory for Commercial Burg Use
When installing the TG-7 Dual Path Series
Communicator
for Commercial Burglary or combination
Fire and Burglary Applications, a tamper switch is used to monitor the enclosure opening. The
tamper switch needs to be connected to a zone on the panel and shall designate the zone as
Tamper Protection. All Canadian Installations shall also meet the installation requirements of
CAN/ULC-S302 Standard for Installation and Classification of Burglar Alarm Systems for Financial
and Commercial Premises, Safes and Vaults.
Optional Use or As Required by AHJ
For other installations, a tamper switch can be used to report unauthorized alarm system access by
connecting it to a zone on the panel and designating the zone as Tamper Protection. Some local
enforcing authorities may require the tamper feature be used. If a tamper switch is not included
with a particular model, the Telguard TG-TAMPER Accessory, available from most distributors, can
be used. Follow the included instructions for easy attachment.
