TG-7 Dual Path Series Installation & Operating Guide
23
56052601 Rev B © 2022 Telguard
Appendix 1 Connection Guide
Wiring Diagrams
The following wiring diagrams show the configurations in which the communicator can be used.
These diagrams apply to both fire and burglary systems in both U.S. and Canada (unless noted).
Dual Path Wiring Applicable to Cellular or LAN Primary:
Physical installation is the same for either Dual Path mode of operation. The configuration chosen
during registration is what determines which is the primary and which is the secondary path. In this
configuration, the LAN connection will be monitored by the communicator.
This configuration provides for Active communication for Canadian fire systems and P2 line security
for Canadian burglary systems.
LED1
LED2
LED3
LED4
LED5
LED6
LED7
LED8
FACP
TRIP
INPUT
EARTH
GROUND
A
n
te
n
n
a
NOTE 2
NOTE 2: Secondary dialer on FACP must
be disabled, or connections spliced.
See Appendix 3 for instructions.
R
ROUTER, SWITCH,
or OTHER LAN PORT
AC
Plug-in
Adapter
Battery
NOTE 1
NOTE 1: Use either AC Power
(from Adapter) with Battery
or use DC Power (from Panel).
NOTE 1
