BATTERY INSTALLATION
Insure that the OFF/ON Volume control knob
is turned OFF. Access the battery compartment
by removing the belt clip on the back of the
unit. Release the 1/4 turn fastener located on
the back of the belt clip and remove belt
clip/cover.
Remove the battery holder from the box. Insert
six (6) AA batteries in the holder, paying close
attention to polarities of the batteries.It may be
necessary to turn the batteries with the thumb
and forefinger the first few times the batteries
are inserted into the battery holder to insure
good positive contact. Insert the holder into the
case and replace the belt clip/battery cover and
engage the 1/4 turn fastener.
Figure 29
Battery Installation
-25-
REMOVE BELT CLIP
