Remoting Antennas:
It will be necessary to
remote both the transmit and receive antennas
on the BTR-200 when it is rack mounted.
Connect the coax cable assembly (not sup-
plied), to the back of the receive antenna re-
ceptacle and remote the 5/8-wave antenna. The
antenna can be attached to either a wall mount
bracket or a microphone stand bracket (not
supplied). See “Accessory” section for order
information.
You will also need to remote the transmit an-
tenna in the same manner. Connect a coax ca-
ble assembly to the transmit antenna
receptacle. Remote the 5/8-wave antenna, by
attaching the antenna to one of the brackets
(not supplied).
Figure 20
Remoting Antennas When Rack Mounted
-20-
TE
LE
X
Ext Intercom
Aux Audio
1
3
4
2
Portable Stations
Carrier Status
BTR-200 II
Mic On Push Twice to Latch
Headset
Controls
Volume
Power
Headset
Portable Station Connect
