42
5.3.1.3 Wireless
Parameters
WLAN Service:
Default setting is set to
Enable
.
Mode:
The default setting is
802.11g+n
(Mixed mode). If you do not know or have both
11g and 11n devices in your network, then keep the default in
mixed mode
. From the
drop-down manual, you can select
802.11g
if you have only 11g card. If you have only 11b
card, then select
802.11b
. If you have only 11n card, then select
802.11n
.
ESSID:
The ESSID is the unique name of a wireless access point (AP) to be distinguished
from another. For security propose, change to
a unique ID name to the AP which is already
built-in to the router’s wireless interface. It is case sensitive and must not excess 32
characters. Make sure your wireless clients have exactly the ESSID as the device, in order
to get connected to your network.
Note:
ESSID is case sensitive and must not excess 32 characters.
Hide ESSID:
It is function in which transmits its ESSID to the air so that when wireless
client searches for a network, router can then be discovered and recognized. Default
setting is
Disable.
Enable:
Select Enable
if you do not want broadcast your ESSID. When select
Enable, no one will be able to locate the Access Point (AP) of your router.
Disable:
When Disable is selected, you can allow anybody with a wireless client to
be able to locate the Access Point (AP) of your router.
Summary of Contents for TW-EA514
