CC-10
INSTRUMENT MANUAL
Phone:(215) 947-2500 fax:(215) 947-7464 e-mail:[email protected] web site:www.televac.com
CC-10 MANUAL REV D
Page 11 of 40
Y
TELEVA
4.5
Explanation of each mode
Measurement Mode
Pressure is displayed on the main display and the status of SP (set point) and HV (high voltage)
are indicated by LED lamp. Whenever power is turned on this mode is selected first. Also the unit
returns to this mode when one of the following situations is happened.
(1) In any program modes when a set of the parameters are stored by pushing [ENT] key or
(2) When the unit travels through all modes by pushing [FUNC] key one after another. or
(3) While in program mode and there is no operation for about 30 second.
SP1
SP2
SP3
HV
Pa
ENT
X10
FUNC
Pressure is displayed
Status of SP1, SP2, SP3 and HV are indicated by LED lamp.