CC-10
INSTRUMENT MANUAL
Phone:(215) 947-2500 fax:(215) 947-7464 e-mail:[email protected] web site:www.televac.com
CC-10 MANUAL REV D
Page 33 of 40
Y
TELEVA
7.3 Sensor Disassembly
1. Unscrew the nut counter clockwise, and remove the washer and the spacer.
2. Pull the anode pin (located at the center) upward until the whole electrode assembly is come out of the
sensor body. Remove the magnet assembly and the O-ring.
( the electrode assembly and the washer are magnetic. Keep them off the magnet so as not to be
attracted by the magnet.)
7.4 Sensor Cleaning
Polish the anode and the inner surface of the envelope with a fine emery paper.
