CC-10
INSTRUMENT MANUAL
Phone:(215) 947-2500 fax:(215) 947-7464 e-mail:[email protected] web site:www.televac.com
CC-10 MANUAL REV D
Page 16 of 40
Y
TELEVA
When
“parameter lock” is enabled the current parameter is displayed in the right side two digits.
01: Log output -> Width of one decade -> full scale
02: combined output
03: out put for DS-10 display unit
Explanation of the output full scale If the Log output is selected and the width of one decade is set to
0.5(V), the range of the output voltage corresponding to the effective voltage of 1V to 10V is shown in
the figure below.
0.5V/decade x 12 decade= 6V
If the Log output is selected and the width of one decade is set to 1.0(V), the range of the output voltage
corresponding to the effective voltage of 1V to 10V is shown in the figure below.
1.0V/decade x 12 decade= 12V
SP3
SP2
SP1
HV
Torr
X10
FUNC
ENT
Output to display
unit
Lit Blink
To select output for DS-10 display unit set the right side two digits that
are blinking at 03 then push [ENT] key to register the parameter. The unit
returns to measure mode.
Effective voltage range (V)
ATM set at 10 V
ATM set at 9 V
ATM set at 8 V
ATM set at 7 V
10
-9
10
-7
10
-5
10
-3
10
-1
10
1
10
3 Torr
10
-9 Torr
10
-9 Torr
10
-9 Torr
10
-9 Torr
10
3 Torr
10
3 Torr
10
3 Torr
10
3 Torr
1
2
3
4
5
6
7
8
9
10
