PRISM MPX2-DUALDSP Installation and Safety Instructions
vii
Disable the product if it is damaged.
Do not use the product if it is damaged or operates incorrectly. If
in doubt about safety of the product, turn it off and disconnect the power cord. Clearly mark the
product to prevent its further operation.
Before use, inspect voltage probes, test leads, and accessories for mechanical damage and replace
when damaged. Do not use probes or test leads if they are damaged, if there is exposed metal, or if a
wear indicator shows.
Examine the exterior of the product before you use it. Look for cracks or missing pieces.
Use only specified replacement parts.
Do not operate in wet/damp conditions: Be aware that condensation may occur if a unit is moved
from a cold to a warm environment.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry: Remove the input signals before you clean the product.
Provide proper ventilation: Refer to the manual's installation instructions for details on installing the
product so it has proper ventilation.
Slots and openings are provided for ventilation and should never be covered or otherwise obstructed.
Do not push objects into any of the openings.
Provide a safe working environment: Always place the product in a location convenient for viewing
the display and indicators.
Be sure your work area meets applicable ergonomic standards. Consult with an ergonomics
professional to avoid stress injuries.
Use only the Telestream rackmount hardware specified for this product.
Service Safety Summary
The Service safety summary section contains additional information required to safely perform
service on the product. Only qualified personnel should perform service procedures. Read this
Service safety summary and the General safety summary before performing any service procedures.
To avoid electric shock:
Do not touch exposed connections.
Do not service alone:
Do not perform internal service or adjustments of this product unless another
person capable of rendering first aid and resuscitation is present.
Disconnect power:
To avoid electric shock, switch off the product power and disconnect the power
cord from the mains power before removing any covers or panels, or opening the case for servicing.
Use care when servicing with power on:
Dangerous voltages or currents may exist in this product.
Disconnect power, remove battery (if applicable), and disconnect test leads before removing
protective panels, soldering, or replacing components.
Verify safety after repair:
Always recheck ground continuity and mains dielectric strength after
performing a repair.
