PRISM MPX2-DUALDSP Installation and Safety Instructions
vi
To safely perform service on this product, see the Service safety summary that follows the General
safety summary.
General Safety Summary
Use the product only as specified. Review the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it. Carefully read all instructions. Retain these
instructions for future reference.
Comply with local and national safety codes.
For correct and safe operation of the product, it is essential that you follow generally accepted safety
procedures in addition to the safety precautions specified in this manual.
The product is designed to be used by trained personnel only.
Only qualified personnel who are aware of the hazards involved should remove the cover for repair,
maintenance, or adjustment.
Before use, always check the product with a known source to be sure it is operating correctly.
While using this product, you may need to access other parts of a larger system. Read the safety
sections of the other component manuals for warnings and cautions related to operating the system.
When incorporating this equipment into a system, the safety of that system is the responsibility of the
assembler of the system.
To Avoid Fire or Personal Injury
Use proper power cord:
Use only the power cord specified for this product and certified for the
country of use. Do not use the provided power cord for other products.
Ground the product:
This product is grounded through the grounding conductor of the power cord. To
avoid electric shock, the grounding conductor must be connected to earth ground. Before making
connections to the input or output terminals of the product, ensure that the product is properly
grounded. Do not disable the power cord grounding connection.
Power disconnect:
The power cord disconnects the product from the power source. See instructions
for the location. Do not position the equipment so that it is difficult to operate the power cord; it must
remain accessible to the user at all times to allow for quick disconnection if needed.
Observe all terminal ratings:
To avoid fire or shock hazard, observe all rating and markings on the
product. Consult the product manual for further ratings information before making connections to the
product. Do not apply a potential to any terminal, including the common terminal, that exceeds the
maximum rating of that terminal.
Do not operate without covers:
Do not operate this product with covers or panels removed, or with
the case open. Hazardous voltage exposure is possible.
Avoid exposed circuitry:
Do not touch exposed connections and components when power is present.
Do not operate with suspected failures:
If you suspect that there is damage to this product, have it
inspected by qualified service personnel.