10
PRISM MPX2-DUALDSP Installation and Safety Instructions
Connect the Dual Display to the instrument
After the Dual Display has been installed in the rack, connect it to the MPX2 instrument.
NOTE.
When connecting the Dual Display to two MPX2 instruments, connect one MPX2 to Display 1 and the other MPX2
to Display 2. Do not enable the Extended display mode on either MPX2 instrument. If you connect the Dual Display to a
source other than the MPX2 instrument, be aware that the Dual Display has only been extensively tested with 1920x1080
video sources.
1.
Connect DisplayPort1 on the MPX2 to the DisplayPort connector on Display 1.
2.
Connect any USB port on the MPX2 to the USB B port on Display 1.
Figure 6
: Connect the MPX2 to Display 1 (primary)
