PRISM MPX2-DUALDSP Installation and Safety Instructions
7
Install the USB/headphone connectors (optional)
If desired, install the USB/headphone connectors on right and left rack ears. The USB/headphone connectors are not
required for Dual Display operation. You have the option to install one, two, or none of the connectors to the rack ears.
1.
Remove the four screws on the top and bottom of the rack ear cover plates. Put the screws aside for use in step 4.
2.
Remove the cover plate from the front of each rack ear.
Figure 2
: Remove the rack ear screws and cover plate
3.
Guide the USB/headphone cables through the front of each rack ear.
4.
Use the four screws from step 1 to secure the USB/headphone connector from the back of each rack ear.
Figure 3
: Guide the connections through the rack ears and secure with screws
