PRISM MPI2-RACK-MD Installation and Safety Instructions
1
Installation
Initial product inspection
Perform the following product inspection procedure when you receive your extended touch display with rack cabinet:
1.
Inspect the two shipping cartons for external damage, which may indicate damage to the rack cabinet and extended
touch display.
2.
Verify that the one shipping carton contains the rack cabinet and the other shipping carton contains the extended touch
display, the standard accessories, and any optional accessories that you ordered. (See
3.
Remove the PRISM MPI2-RACK-MD from the shipping cartons, and then check that the extended touch display with rack
cabinet has not been damaged in transit. Prior to shipment the items are thoroughly inspected for mechanical defects.
The exterior should not have any scratches or impact marks.
NOTE.
Save the shipping cartons and packaging materials for module repackaging in case shipment becomes necessary.
Exterior cleaning
The extended touch display with rack cabinet exteriors were inspected for debris when shipped. If necessary, you can clean
the exterior of the items as follows.
WARNING.
To prevent injury or death, power off the display and disconnect it from line voltage before cleaning.
Clean the exterior surfaces of display with a dry lint-free cloth or a soft-bristle brush. If any dirt remains, use a cloth or swab
dipped in a 75% isopropyl alcohol solution. Use a swab to clean narrow spaces around controls and connectors. Do not use
abrasive compounds on any part of the extended touch display that may be damaged by it.
CAUTION.
Avoid the use of chemical cleaning agents that might damage the plastics used in the items. Use a 75% isopropyl
alcohol solution as a cleaner and rinse with deionized water. Before using any other type of cleaner, consult support:
telestream.net/telestream-support/video/support.htm.
Summary of Contents for PRISM MPI2-RACK-MD
Page 6: ......