viii
PRISM MPI2-RACK-MD Installation and Safety Instructions
generally accepted safety procedures in addition to the safety precautions specified
in this manual. The product is designed to be used by trained personnel only.
Only qualified personnel who are aware of the hazards involved should remove
the cover for repair, maintenance, or adjustment.
Before use, always check the product with a known source to be sure it is
operating correctly.
This product is not intended for detection of hazardous voltages.
Use personal protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
When incorporating this equipment into a system, the safety of that system is the
responsibility of the assembler of the system.
WARNING.
To prevent injury or death, power off the display and disconnect it from line voltage before
cleaning.
CAUTION.
Avoid the use of chemical cleaning agents that might damage the plastics used in the items.
Use a 75% isopropyl alcohol solution as a cleaner and rinse with deionized water. Before using any other
type of cleaner, consult support:
telestream.net/telestream-support/video/support.htm.
CAUTION
. To reduce risk of fire and shock, use the certified power cord provided with the product.
CAUTION
. Damage to the module can occur if this module is powered on at temperatures outside the
specified temperature range.
WARNING
. To reduce the risk of fire and shock, ensure that the mains supply voltage fluctuations do not
exceed 10% of the operating voltage range.
W
ARNING
. In the module, only the line conductor is fused for over-current protection. The fuse is internal
and not user replaceable. Do not attempt to replace the fuse. If you suspect the fuse has blown, return the
unit to an authorized service center for repair.
CAUTION.
To prevent risk of fire, adequate airflow to instrument(s) and rack adapter must be
maintained. Failure to provide adequate airflow to instrument(s) could cause an instrument to shut
down.
Inadequate airflow includes placing instrument(s) and rack adapter in any small, enclosed
room that lacks a ventilation system, such as a closet. If the airflow is restricted or blocked
and the instrument(s) do not shut down, the risk of fire is increased and the instrument(s)
could be permanently damaged.
CAUTION.
To minimize the risk of damage to the module, it is strongly recommended that the power
cord be connected to the module before the power cord is connected to the AC power source.
Summary of Contents for PRISM MPI2-RACK-MD
Page 6: ......
