vi
PRISM MPI2-RACK-MD Installation and Safety Instructions
To Avoid Fire or Personal Injury
Use proper power cord:
Use only the power cord specified for this product and certified for the country of
use. Do not use the provided power cord for other products.
Ground the product:
This product is grounded through the grounding conductor of the power cord. To avoid
electric shock, the grounding conductor must be connected to earth ground. Before making connections to
the input or output terminals of the product, ensure that the product is properly grounded. Do not disable
the power cord grounding connection.
Power disconnect:
The power cord disconnects the product from the power source. See instructions for the
location. Do not position the equipment so that it is difficult to operate the power cord; it must remain
accessible to the user at all times to allow for quick disconnection if needed.
Observe all terminal ratings:
To avoid fire or shock hazard, observe all rating and markings on the product.
Consult the product manual for further ratings information before making connections to the product. Do
not apply a potential to any terminal, including the common terminal, that exceeds the maximum rating of
that terminal.
Do not operate without covers:
Do not operate this product with covers or panels removed, or with the case
open. Hazardous voltage exposure is possible.
Avoid exposed circuitry:
Do not touch exposed connections and components when power is present.
Do not operate with suspected failures:
If you suspect that there is damage to this product, have it
inspected by qualified service personnel.
Disable the product if it is damaged.
Do not use the product if it is damaged or operates incorrectly. If in
doubt about safety of the product, turn it off and disconnect the power cord. Clearly mark the product to
prevent its further operation.
Before use, inspect voltage probes, test leads, and accessories for mechanical damage and replace when
damaged. Do not use probes or test leads if they are damaged, if there is exposed metal, or if a wear
indicator shows.
Examine the exterior of the product before you use it. Look for cracks or missing pieces.
Use only specified replacement parts.
Do not operate in wet/damp conditions: Be aware that condensation may occur if a unit is moved from a
cold to a warm environment.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry: Remove the input signals before you clean the product.
Provide proper ventilation: Refer to the manual's installation instructions for details on installing the product
so it has proper ventilation.
Slots and openings are provided for ventilation and should never be covered or otherwise obstructed. Do
not push objects into any of the openings.
Provide a safe working environment: Always place the product in a location convenient for viewing the
display and indicators.
Be sure your work area meets applicable ergonomic standards. Consult with an ergonomics professional
to avoid stress injuries.
Use only the Telestream rackmount hardware specified for this product.
Summary of Contents for PRISM MPI2-RACK-MD
Page 6: ......
