GETTING STARTED GUIDE
NI PXIe-4464
DSA Analog Input
This document explains how to install, configure, and set up the NI PXIe-4464 Dynamic Signal
Acquisition (DSA) analog input module. Driver support for the NI PXIe-4464 was first available
in NI-DAQmx 9.9.1. For the list of devices supported by a specific release, refer to the
NI-DAQmx Readme, available on the version-specific download page or installation media. To
download NI-DAQmx 9.9.1, visit
ni.com/info
and enter the Info Code
PXIE4464
. The
NI PXIe-4464 is available with BNC connectors or Mini-XLR connectors.
Contents
Electromagnetic Compatibility Guidelines .............................................................................. 1
Unpacking................................................................................................................................. 2
Preparing the Environment ....................................................................................................... 2
Verify the Kit Contents............................................................................................................. 3
Other Equipment....................................................................................................................... 3
Install the Software ................................................................................................................... 3
Install the Hardware.................................................................................................................. 4
Configure the Hardware in MAX ............................................................................................. 5
Connect a Signal Source to the NI PXIe-4464 ......................................................................... 6
Environmental Management..................................................................................................... 7
Worldwide Support and Services ............................................................................................. 7
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with radio
and television reception and prevent unacceptable performance degradation, install and use this
product in strict accordance with the instructions in the product documentation.
