background image

TERM. 
The license granted herein is effective upon acceptance by Customer, and shall remain in effect until terminated as provided herein. The 

license may be terminated by Customer at any time upon written notice to Telestream. The license may be terminated by Telestream or any 

third party from whom Telestream may have obtained a respective licensing right if Customer fails to comply with any term or condition and 

such failure is not remedied within thirty (30) days after notice hereof from Telestream or such third party. Upon termination by either party, 

Customer shall return to Telestream or destroy, the Program and all associated documentation, together with all copies in any form. 
LIMITED WARRANTY. 
The Program is provided "as is" without warranty of any kind, either express or implied. Telestream does not warrant that the functions 

contained in the Program will meet Customer's requirements or that the operation of the Program will be uninterrupted or error-free. 
TELESTREAM AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE. 
LIMITATION OF LIABILITY, IN NO EVENT SHALL TELESTREAM OR OTHERS FROM WHOM TELESTREAM HAS OBTAINED A 

LICENSING RIGHT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR 

CONNECTED WITH CUSTOMER'S POSSESSION OR USE OF THE PROGRAM, EVEN IF TELESTREAM OR SUCH OTHERS HAS 

ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. 
THIRD-PARTY DISCLAIMER. 
Except as expressly agreed otherwise, third parties from whom Telestream may have obtained a licensing right do not warrant the program, 

do not assume any liability with respect to its use, and do not undertake to furnish any support or information relating thereto. 
GENERAL. 
This Agreement contains the entire agreement between the parties with respect to the use, reproduction, and transfer of the Program. 
Neither this Agreement nor the license granted herein is assignable or transferable by Customer without the prior written consent of 

Telestream. 
This Agreement and the license granted herein shall be governed by the laws of the state of California. 
All questions regarding this Agreement or the license granted herein should be directed to the nearest Telestream Sales Office.

Summary of Contents for PRISM MPI2-RACK-MD






























Reviews: