Telestream PRISM MPI2-10, User Manual

Page: 41 / 302

Getting Started
MPX2-10 Rear Panel Connectors
43
PRISM MPI2-10-MPX2-10 User Manual
MPX2-10 Rear Panel Connectors
The next illustration shows the external connections on the rear panel of the MPX2–25
instrument. A description of each connector is provided. See MPX2-10 Front-panel
Controls for information about the front panel connectors.
Descriptions of numbered PRISM MPX2-10 rear-panel connectors
Item
number
Connector label,
symbol, or end Description
1 Connector for an AC power source.
2 DP Two DisplayPort outputs are for external monitors. The output
video format is 1920×1080.
1
Note:
An MPX2-10 can use a maximum of 2 external displays, DP
or HDMI.
3 SERIAL Serial interface, 9-pin connector, is not used.
4 Ethernet port is a standard RJ-45 connector for 10/100/1000Base-T
Ethernet cable.
5 SDI OUT 2 SDI output of the selected SDI, ST2022, or ST2110 input:
Quadlink inputs (4k/8k) the Aux out is link 1
ST2110-20/30 inputs are supported.
6 10GbE
SFP+ 2-1
Two optional SFP ports for 10 GbE Ethernet applications.
7 SDI
SFP+ 4-3
Two optional SFP outputs for SDI signals. SDI SFP inputs 3 and 4
support HD/3G signals.