Telestream PRISM MPI2-10, User Manual

Page: 244 / 302

Application Information
IP Generator Application
PRISM MPI2-10-MPX2-10 User Manual
246
– 1080i 60: available for format HD 1080
– 1080p 60: available for format 3G LevelA
•
Pattern: Select this drop-down list to choose from the patterns: Black or 100% Color
Bars.
•
Motion: Select this to enable or disable horizontal motion of the color bars.
Note:
The Motion option is unavailable when Pattern is set to Black.
VIDEO TRANSPORT
•
Packing Mode: Select this option to choose one of these packing modes:
– Block: Block Packing Mode is based on 180 byte blocks and supports many
formats.
– General: General Packing Mode follows the open packing standards of RFC 4175.
•
RTP Payload Type: Use this setting to give the generated IP stream a RTP Payload
Type number between 96 to 127.
Note:
Each generated IP stream must have a unique RTP Payload Type number.
•
Packet Read Schedule (PRS): Select this option to choose one of these read
schedules.
– Gapped: Gapped PRS reads packets at an equally spaced sequence throughout
the active field or frame interval and accounts for vertical blanking (gaps).
– Narrow (Linear): Narrow (linear) PRS reads the packets at an equally spaced
sequence throughout a video frame.
VIDEO PORT SFP+ 1 and SFP+ 2
Video port SFP 1 and SFP 2 can be Enabled or Disabled.
When enabled, each port is configured using the Destination Address and Destination
Port.