Telestream PRISM MPI2-10, User Manual

Page: 216 / 302

Application Information
IP Session Application
PRISM MPI2-10-MPX2-10 User Manual
218
2.
In the Audio drop-down menu, select the stream number to monitor.
The selected audio stream is noted in the AUDIO tab.
3. Close the settings menu.
Elements of the AUDIO Tab Display
•
L3 IP
– Source Addr: Lists the source addresses for the L3 IP layer.
– Destination Addr: Lists the destination addresses for the L3 IP layer.
•
L4 UDP
– Source Port: Lists the source ports for the L4 UDP layer.
– Destination Port: Lists the destination ports for the L4 UDP layer.
•
L5 RTP: Lists these parameters of the L5 RTP (Real Time Protocol) layer. RTP
Datagrams are defined in IETF RFC 3550.
– Version: Identifies the version of RTP and should be a value of 2.
– Padding: Indicates whether padding bytes are present. Possible values are:
false: Indicates no extra padding bytes are at the end of the RTP packet.
true: Indicates that padding octets have been added to the RTP packet that are
not part of the payload.
– Extension: Indicates whether an extension is present. Possible values are:
false: Indicates no extension is present.
true: Indicates an extension is present.
– CSRC: Identifies the Contributing Source IDs. This value should be set to zero.
– Marker: This value should be set to 1 to indicate the last Media Datagram of the
video frame. The value is set to 0 for all other Media Datagrams and should be 0
for most packets.
– Payload type: Identifies the type of RTP payload.
– Sequence number: RTP sequence counter that changes by one for each RTP
Media Datagram that is sent.