Telestream PRISM MPI2-10, User Manual

Page: 267 / 302

Application Information
Stop Display Application
269
PRISM MPI2-10-MPX2-10 User Manual
3.
Select Parade or Overlay to switch between the Display Style options. The options
depend on which Display Style is active.
– When the Parade display style is active you can select from 1 line or 1 field.
– When Overlay display style is active you can select from 1 line, 2 line, 1 field, or 2
field.
Line Select Function
Line Select allows you to select a single picture line to monitor in the display. By default
All Lines is selected and all lines are monitored.
Note:
The same line is selected in any trace display if line select is enabled.
To turn on Line Select (and choose the line to monitor):
1.
Select the
Lines
at the bottom of the tile.
2.
Select
1 Line
.
– To scroll through lines, select the + and – buttons.
– To enter a specific line to monitor:
• select Line Sel. and enter the line on the keypad,
or
• in the Picture application, use the line-select cursor (for active lines).