Functions
Headphone/Speaker Volume, Balance, Device, and Source Adjustment
PRISM MPI2-10-MPX2-10 User Manual
140
Headphone/Speaker Volume, Balance, Device, and
Source Adjustment
In addition to the optional integrated speakers on MPX2-10, headphones can be
connected to MPI2-10 or MPX2-10 products.
•
MPI2-10 audio output rear panel connector
•
MPX2-10 audio output rear panel connector
•
MPX2-10 front panel headphone port
To access the volume, balance, and source controls, select the
Volume
icon (
).
The available options:
•
Select the audio device to use.
•
Select the source from the list of available channel pairs.
•
Use the slider or arrow buttons to turn the volume up or down.
•
Use the slider or arrow buttons to adjust the audio balance left or right.
•
Select the mute button to mute the audio.
•
Select the downmix button to listen to a downmixed group of channels.
If the downmix button is not visible, as in the next illustration, the Program
configuration might not be on or set.
Enable the Downmix Button
Note:
The Dolby program is configured automatically, based on metadata.
1.
Select the
Settings
icon (
) to open the Settings menu.
2.
Select
Inputs
to open the Inputs submenu.
3.
Select the input with the channels to downmix.
a.
If the input is SDI, select
AUDIO
.
b.
If the input is 2022, select
AUDIO
.
4.
Check the Program Configuration is on and configured for the input.
5.
Select
Save
.
6.
Select the
Volume
icon (
). The downmix button is visible.
Summary of Contents for PRISM MPI2-10
Page 1: ...PRISM MPI2 10 and MPX2 10 SDI IP Waveform Monitor User Manual April 2021 D00010021C...
Page 6: ...6 PRISM MPI2 10 MPX2 10 User Manual...
Page 52: ...Getting Started Activity Center PRISM MPI2 10 MPX2 10 User Manual 54...
Page 74: ...Methods of Operation Remote Control through API Commands PRISM MPI2 10 MPX2 10 User Manual 76...
