Telestream PRISM MPI2-10 User Manual Download Page 19

Page: 19 / 302

Preface

PRISM MPI2-10-MPX2-10 User Manual

Conventions used in this manual

The PRISM SDI / IP Waveform Monitor is also referred to as the "PRISM monitor"

throughout this manual.

Telestream Contact Information

To obtain product information, technical support, or provide comments on this guide,

PRISM MPI Dual Rack

Cabinet Version 2

Installation Instructions

Field Install

Instructions

071-3725-

Describes how to install an MPI

instrument in a 19” equipment rack

using the optional MPI-RACK-MM or

MPI-RACK-MW dual rack cabinet.

MPX Rackmount Slides

and Rails Installation

Instructions

Field Install

Instructions

071-3706-

Describes how to install an MPX

instrument in a 19” equipment rack

PRISM MPI2-RACK-MD
Installation and Safety

Instructions

Field Install

Instructions

071-3728-

Provides installation and safety

information for the PRISM MPI2-RACK-

MD Rack Cabinet with touch display.

PRISM MPX2-DUALDSP
Installation and Safety

Instructions

Field Install

Instructions

071-3729-

Provides installation and safety

information for the PRISM MPX2-

DUALDSP Dual Display module.

Field Upgrade Kit

Instructions

Field Install

Instructions

075-1136-

Describes how to install post-purchase

field upgrades in the instrument.

Product documentation

Resource

Contact Information

Telestream Video

Support

Web Site:

http://www.telestream.net/telestream-support

Email: [email protected]
US and Canada Toll-free: 1-844-219-5329
Outside of US and Canada: 1-503-967-9833

Telestream

Web Site:

www.telestream.net

Sales and Marketing Email:

[email protected]

Telestream

848 Gold Flat Road, Suite 1

Nevada City, CA. USA 95959

Summary of Contents for PRISM MPI2-10















































































































































































































































































































Search results

Summary of Contents for PRISM MPI2-10

Reviews:

Brands by name

Popular brands

Telestream PRISM MPI2-10, User Manual

Search results

Summary of Contents for PRISM MPI2-10

Reviews:

Brands by name

Popular brands