Telestream PRISM MPI2-10, User Manual

Page: 245 / 302

Application Information
IP Generator Application
247
PRISM MPI2-10-MPX2-10 User Manual
Note:
The Source IP Address, Source Port, Source MAC Address, and Destination MAC
Address are automatically configured based on the Destination Address and
Destination Port.
Audio Test Signal Options
Under TEST SIGNAL select Audio .
TEST SIGNAL
For audio test signal options, select Audio .
These options are available under TEST SIGNAL.
•
Enable Audio: Select to enable or disable the audio test signal.
•
Channels: Select either 2 or 8 channels.
•
Frequency: Select 1 kHz frequency or Multiple frequencies.
•
Amplitude: Select from these options:
– Mute: always available
– -20 dBFS: available when Frequency is set to 1 kHz
– -18 dBFS: available when Frequency is set to 1 kHz
– Multiple: available when Frequency is set to Multiple
•
Sample Depth (all Channels): This setting lists the sample depth of all channels.
The next table shows the audio test signal values in each channel when both
Frequency and Amplitude, in the settings menu, are set to Multiple.