A D D I T I O N A L V O I P P A R A M E T E R S
C H A P T E R 1 4
219
ECOTEL 3G 16.1. Revised: 2011.
VoipOad=<num>
In the following examples, the OAD is 5175551212.
The digits/numbers defined here will be transmitted in front of the original OAD. In the following
example, 001 will appear in front of the number 5175551212.
EXAMPLE:
VoipOad=001
To transmit only OADs consisting of more digits than those defined, enter a !, followed by the number
of digits, at the end of the entry. If the OAD has more digits, it will be transmitted unchanged. If it has
the same number or fewer digits, only the string in front of the ! will be added in front of the OAD. In
the following example, the digits 0015175551212 will appear:
EXAMPLE:
VoipOad=001!10
If a minus (-) is entered, the original OAD will not appear. In the following example, no number will be
transmitted.
EXAMPLE:
VoipOad=-
If integers are entered before the minus sign, only the digits entered in front of the minus sign will be
displayed. In the following example, 789 will appear.
EXAMPLE:
VoipOad=789-
If an integer is entered after the minus sign, this number of digits will be removed from the beginning
of the OAD. In the following example, 517 will be removed from the OAD:
EXAMPLE:
VoipOad=-3
If -\ is entered followed by the first part of an OAD, that part will be removed. If the string does not
match, the OAD will be transmitted unchanged. In the following example, only 1212 will be transmitted.
EXAMPLE:
VoipOad=-\517555
To modify the original OAD, enter
random<x>
, whereby x represents a number of random digits
between 1 and 10 that will appear in the OAD. In the following example, 001 plus 2 random digits plus
the original OAD will appear.
EXAMPLE:
VoipOad=001random2
NOTE: If the parameter is to be valid in only one direction, you must also set the parameter Voi-
pOadIn or VoipOadOut .
VoipDadIn=<string>
Specifies that the parameter VoipDad is for incoming calls only. If this parameter is not set (default), VoipDad
will apply for both directions.
VoipDadOut=<string>
Specifies that the parameter VoipDad is for outgoing calls only. If this parameter is not set (default), VoipDad
will apply for both directions.
Table 14.1
Customized Parameters: Protocol-Independent VoIP Signaling
(continued)
Protocol-Independent VoIP Signaling Parameters
