S I G N A L I N G A N D R O U T I N G F E A T U R E S
C H A P T E R 8
152
ECOTEL 3G 16.1. Revised: 1 March 2011.
digits will be collected before they are transmitted. The 14 at the end is the sum of the port digits
and the digits of the called party number (e.g. |#20=3, 01555899666=11, 3+11=14).
8 . 3 R E J E C T I N G D A T A C A L L S A N D S P E C I F I E D N U M B E R S
This chapter describes the configuration options for exclusion of data calls, prefixes, or call numbers from the rout-
ing process.
8 . 3 . 1 B L A C K L I S T R O U T I N G
The system will reject all calls directly if the MapAll entry contains the keyword
&
followed by the two-digit cause
value (see ETS 300 102-1).
MapAll<direct>=&<cause>
Example:
In the following example, all calls to the number 004915551234 and all service calls with the
prefix 0180 are rejected with a busy signal. All other calls are sent to the VoIP profile DF:
8 . 3 . 2 W H I T E L I S T R O U T I N G
The following entries enable exclusion of specific OADs or trunk groups:
Restrict<ns>=<pl>
MapAll<pl>=&<cause>
NS refers to the internal controller number and the call’s origination address.
Example:
In the following example, the numbers 12345 and 12346 connected to the PBX at port 10 cannot
make any international calls. All national calls are sent to the VoIP profile DF and all local calls
...
MapAll01555=|#2001555<<14
...
DTMFWaitDial=5
...
A maximum of 5000 MapAll entries per time zone can be defined. For more than 5000
entries, please use the Teles iMNP.
MapAll015551234=&91
MapAll004915551234=&91
MapAll0180=&91
MapAll0=40DF:0
...
MapAll9=40DF:9
A maximum of 1000 Restrict entries per time zone can be defined.
i
i
i
i
