M O B I L E C O N F I G U R A T I O N O P T I O N S
C H A P T E R 9
165
ECOTEL 3G 16.1. Revised: 2011.
9 M O B I L E C O N F I G U R A T I O N O P T I O N S
9 . 1 C O N N E C T I O N T O A V G A T E
The vGATE is a system that enables more convenient management of a network of ECOTEL systems. All SIM cards
in the network are installed in and maintained at a central server, so that it is no longer necessary to install SIM
cards into each gateway. The ECOTELs connected to the vGATE do not require SIM-card carriers, as the vGATE
contains SIM-card carriers for the entire network.
The following parameters must be configured in the
pabx.cfg
of each ECOTEL connected to the vGATE. After
the parameters have been entered, you must restart the ECOTEL to activate the changes:
Be sure to save a backup copy of the configuration files before making changes.
Changing configuration data and/or SIM-card positions may lead to malfunctions and/
or misrouting, as well as possible consequential damages. Make changes at your own
risk. TELES is not liable for any damages resulting from or related to such changes.
Therefore, please thoroughly check any configuration changes you or a third party
have made.
Bear in mind that no SIM-card carriers are to be inserted in ECOTEL
s
connected to a
vGATE.
SIMS
Enter this keyword in the
Subscriber
lines of the mobile controllers to connect the system to a vGATE.
EXAMPLE:
Subscriber04=TRANSPARENT ROUTER UMTS[0000,00000,+00000,1,1,1,SIMS] CHADDR ALARM
SimCtrlUnitAddress=<ip addr>
Enter the vGATE Control Unit’s IP address. Set this parameter in the IP configuration section.
EXAMPLE:
SimCtrlUnitAddress=192.168.0.1
SimCtrlUnitCheckInterval=<sec>
The iGATE will send a keep alive to the vGATE Control Unit in the check intervals set here (no default value,
not executed if not set).
SimCtrlUnitMinRSSIInterval=<sec>
The Received Signal Strength Indication is sent with a minimum interval of 60 seconds per controller. Use this
parameter to change the value in seconds.
!
!
i
i
