Telematrix MARQUIS 9600 Series, User Manual

Page: 9 / 30

Keys Mode Function/Display
1 Dialing “1”or press for 3 s
to pick up voicemail
message
Config “1”, “space”, “@”, “_”,
“-”, “/”, “%”
2 Dialing “2”
Config “2”, “a”, “b”, “c”, “A”, “B”,
“C”
3 Dialing “3”
Config “3”, “d”, “e”, ”f”, “D”, “E”,
“F”
4 Dialing “4”
Config “4”, “g”, “h”, “I”, “G”, “H”,
“I”
5 Dialing “5”
Config “5”, “j”, “k”, “l”, “J”, “K”,
“L”
6 Dialing “6”
Config “6”, “m”, “n”, “o”, “M”,
“N”, “O”
7 Dialing “7”
Config “7”, “p”, “q”, “r”, “s”, “P”,
“Q”, “R”, “S”
8 Dialing “8”
Config “8”, “t”, “u”, “v”, “T”, “U”,
“V”
9 Dialing “9”
Config “9”, “w”, “x”, “y”, “z”,
“W”, “X”, “Y”, “Z”
0 Dialing “0”
Config “0”, “*”, “#”, “$”, “&”,
“?”, “!”, “<”, “>”
* Dialing “*”
Config “*”, “ .”
# Dialing Dial as the first number
or finish number sign
2. Operating Method
for Dialing
2.1 How to Dial a Phone
You can place calls after the phone is successfully
registered to a SIP server/IP-PBX . Please confirm
that all cables for power and network connectivity
are correct .
2.1.1 BASIC CALL
1 . Place a call using the handset:
Line 1/Line 2 is in off-hook status, dial
a number, and then dial # as the ending
character after the last digit to immediately
send the digits to the SIP server .
2 . Place a call using the speakerphone:
The phone has an active keypad . That
means pressing a number on the dial-pad
will take Line 1 off-hook: dial the number
and then dial # as the ending character
after the last digit to immediately send the
digits to the SIP server .
2.1.2 HOLD AND RESUME
1 . You can hold and resume calls . Only
one call can be active at any given time
on a corded phone; all other connected
calls must be placed on hold . Two-line
cordless phones can have up to two active
conversations .
1) Put a call on hold
Make sure the call you want to put on
Hold is enabled, then press the Hold key .
2) Resume a call from hold
Make sure the appropriate call is
enabled, then press the Hold key or
press the Line 1 or Line 2 key to resume
the call on whichever line was on Hold .
2 . Call Park feature
Enable Call Park feature and the Hold key
can be used as a Park key (see below) .
9600 SERIES VOIP USER GUIDE: CETIS SIP 2017
www.telematrix.net 9