12
www.telematrix.net
9600 SERIES VOIP USER GUIDE: CETIS SIP 2017
3.2 Network Settings
You can get your network information from this
page:
3.2.1 WAN SETTINGS
WAN port network settings page can be used to
configure network access settings . Some vendors
call it the network port . This port is used to power
(POE) and connect the phone to the network .
Supports static IP, DHCP (to obtain dynamic IP
address), and PPPoE .
3.2.2 BASIC SETTINGS
Basic Setting
Network Mode
Select WAN port network
mode . Default is DHCP .
Link Mode
Auto is default .
Primary DNS
Set the primary DNS IP
address .
Secondary DNS Set the secondary DNS IP
address .
3.2.3 DHCP
If there is a DHCP server in your local network,
the phone will automatically obtain WAN port
network information from your DHCP server .
3.2.4 STATIC IP SETTINGS
If you wish to set the phone to a static IP address,
configure the IP address, subnet mask, and
gateway here . DNS servers configured under
Basic Settings will be used .
Static IP Setting (Required if Network Mode Is
Set to Static IP)
Static IP Address
Set static IP address .
Subnet Mask
Set network mask of static
IP .
Default Gateway
Set default gateway IP
address of static IP .
3.2.5 PPPOE SETTINGS (POINT TO
POINT PROTOCOL OVER ETHERNET)
PPPoE Setting (Required if Network Mode Is
Set to PPPoE)
User Account
Set your PPPoE user
account .
Password
Set the password of your
PPPoE account .
3.2.6 802.1X SETTINGS
802.1x Settings
802 .1x_Enable
Enable or disable 802 .1x
authentication .
802 .1x_UserName
802 .1x User name .
