14
www.telematrix.net
9600 SERIES VOIP USER GUIDE: CETIS SIP 2017
Register
Register Server
Use Service
Enable or disable this SIP
account . Default is Disabled .
Display Name Set display name of your SIP
account .
User Name
Set user name (SIP account
number) .
Authorization
User Name
Set authorization user name of
your SIP account .
Password
Set password of your SIP
account .
Register
Server Port
Set register server’s port
number . Default is 5060 .
Register
Server
Address
Set register server’s IP
address or domain name .
Domain
Realm
Set server authentication
realm .
Outbound
Proxy
Set if your service provider has
different proxy server from
register server . Most of the
service providers use the same
address for both servers .
Register
Expire
Set register expire time . The
unit is a second . Default is 300 .
SIP Backup
Type
Set the operation of the
Backup SIP server
SIP Backup
Server
Set the IP address of the
Backup SIP server
Protocol Control
MWI
Subscribe
Set Disable/Enable message
waiting through pull-down
menu, including:
Disable: MWI is disabled, even
if received NOTIFY message
from the server indicating
new voicemail, phone will not
prompt .
Enable (Subscribe): MWI is
enabled and SUBSCRIBE will
be sent, if the server sends
NOTIFY message indicating
new voicemail received, MWI
LED will blink to prompt .
Enable (No Subscribe): MWI
is enabled, but phone will
not send SUBSCRIBE, if the
server sends NOTIFY message
indicating new voicemail
received, MWI LED will also
blink to prompt .
Subscribe
Expire
Set subscribe expire time . The
unit is a second . Default is 300 .
Local SIP Port Set the port to send receive
SIP packets (when transport is
UDP) . Default is 5060 .
DTMF
Select DTMF mode . Choices
can include RFC2833, In
Band, and SIP Info . Default is
RFC2833 .
Anonymous
Call Rejection
Set to reject anonymous calls .
Default is OFF .
PRACK
Enable or disable PRACK .
Rport
Open or close the rport
mechanism .
Transport
UDP/TCP transmission mode .
3.3.2 AUDIO SETTINGS
You can adjust sound and volume settings, set
codecs and ring types and international signal
standards on this page .
