9600 SERIES VOIP USER GUIDE: CETIS SIP 2017
www.telematrix.net
5
Quick Start
Cetis’ next generation of SIP phones has several
deployment options available through the
network . All of them require the download and
application of a configuration file with all the
necessary parameters in place to navigate their
network and register to a SIP PBX/server . The
recommended method of starting is to use the
provided tools to create uniform configuration
files, as each phone endpoint does require a
unique configuration file to operate correctly .
The configuration file is the sum of all of the
parameters found in the web interface of the
phone and constitutes its complete programming
information . By using the Mass Configuration
utility tools, you can ensure that the substitution
of values is not subject to human error that may
happen when programming several hundred
phones by hand .
The initial step in creating a template
configuration file is to program the phone via
web interface for your network and then export
that file from within the web interface . To start
programming the phone, power the phone with
PoE into the WAN port of the phone . When you first
hear the “doodle-doodle” configID tone you do not
want to download a config file; instead, press #
directly to enter into the default standby status .
After the phone enters into the default standby
status, press **47# (** I P #) on the keypad to make
the phone recite and/or display its own IP address .
With that IP address, you may log in and check
the existing configuration or begin programming
the phone through the web interface . Once
programmed and tested in the local environment,
export that config file and use it as a template
configuration file in the Mass Configuration tool .
For Cloud-based systems installers, there is a
new zero-touch method of deployment that
employs a re-direction server, allowing the
installer to simply place a phone on the network,
where the phone will attempt to reach an address
of https://provision .cetis .com during its boot-
up process . At that address, the installer will
have an account with a list of their phones’
valid MAC addresses, and an URL for another
server where the phones’ configuration files
reside . The phone will then go to that re-directed
address and download the configuration file of
<macaddress> .cetis .cfg and apply it . The phone
is then configured .
Alternatively, as the phone boots-up, it will by
default be configured to enable LLDP and DHCP .
This will help to navigate the network to the
proper VLAN and obtain its IP address as well
as the Provisioning Server’s IP address through
a DHCP Server (DHCP Options 60/43 or 66) .
The phone will either download its config file as
<macaddress> .cetis .cfg or, if that file is not found,
the phone will produce a audio prompt (“doodle-
doodle”) tone as well as flashing lights to prompt
the user to enter a “Config ID” .
After inputting the ConfigID through the
numeric keyboard and ending with #, the phone
will download the configuration file named
<ConfigID> .cetis .cfg from the Provisioning
Server . If the download is successful, the phone
will apply the configuration and re-boot . If it
failed—no file found or no server configured—the
phone will boot with default settings .
Function
1 . Support DHCP assigns IP address, etc .,
automatically
2 . Support PPPoE (used while connecting
ADSL, cable modem)
3 . Firmware and configuration can be
updated via HTTP, HTTPS, FTP, and TFTP
4 . Hold function
5 . Speed-dial
6 . DND (Do not disturb), black list, hotline
function
