9600 SERIES VOIP USER GUIDE: CETIS SIP 2017
www.telematrix.net
11
flash, indicating the handset is in register mode;
the ON/OFF light on the handset flashes at the
same time . If the handset registers successfully
to the base, then the Message light on the base
and the ON/OFF light on the handset will stop
flickering and will give the prompt tone for a
successful registration .
Note: Each base phone can register up to 5
handsets.
2.1.11 DELETE HANDSET
Hold down the page key until the MWI light starts
blinking, then release the page key and press it 7
times . After this the MWI light should start blinking
rapidly . After the page light as stopped blinking
rapidly, all handset registrations should be deleted .
2.1.12 SWITCH BETWEEN BASE AND
HANDSET
When a call is active on the base phone, press
the Line 1 or Line 2 handset key and the handset
will pick up the active call . If a call is active on
the handset, press the Line 1 or Line 2 key on the
base to switch the conversation to the base .
2.1.13 SWITCH BETWEEN LINE 1 AND
LINE 2
When Line 1 is on Hold and Line 2 is active, press
the Line 1 key, and Line 1 will no longer be on
Hold—Line 2 is now on Hold . If Line 2 is on Hold
and Line 1 is active, press the Line 2 key for Line
2 to resume and for Line 1 to be placed on Hold .
2.1.14 BASE PHONE AND
CORDLESS HANDSET CAN MAINTAIN
INDEPENDENT CONVERSATIONS
The base phone and the cordless handset can
maintain conversations independently, with true
two-line functionality . For example, Line 1 can
place a call from the base phone to one phone
destination while Line 2 from the cordless
handset can be active to a separate destination .
3. Web Interface
Settings
Connect both the phone and your PC on the same
LAN (Local Area Network), open the browser and
enter the IP address of the phone . The browser
will ask you to enter the username and password .
Please enter the username and password as
to login . Default username and password are
admin/admin .
3.1 Home Page—Summary of
Network Parameters
After entering the username and password, the
following screen is displayed:
