TeleEye VT3-16BA, Installation Manual

Page: 40 / 75

Eye
III+
I
nstallation Guide Page 33
System Configuration and Installation
Router Configuration
Introduction – Use of Router
There are many features in the router. But you only need to use some of the
features provided:
i) Making Connection
ii) Port Mapping
You need to prepare a PC temporarily for configuring the router. To connect to the router
using network cable between the PC and the transmitter by a crossover RJ-45 network
cable, you have to make sure that the PC’s IP address is the same subnet as the router one.
That means if the router IP is 192.168.0.1 and subnet mask is 255.255.255.0, your PC’s
IP address must be 192.168.0.
X
where
X
is between 2 and 254.
Example of Router Setting
External port 1024
Internal IP 192.168.0.2
Internal port 1024
Note that procedures for mapping port on your router may be different on different
model of routers. You have to refer to your router menu to see how to map a
suitable port to the transmitter. For
PLANET Internet SOHO Router XRT-101 /
XRT-711
, please refer to Section A, Appendix.
210.177.50.156
PORT 1024
192.168.0.2
PORT 1024
Auto
connection
Internet
Router
Router
Internet
Login:
210.177.50.156
port 1024
ADSL modem
210.177.50.156
port 1024
192.168.0.1
port 1024
192.168.0.2
port 1024