Eye
III+
I
nstallation Guide
Page 20
System Configuration and Installation
Step 5:
Click on the
General
page. In the
Connection
group with
Device
menu,
choose the suitable
serial port (COM1 or COM 2 or so on) for current connection to the transmitter. At the same
time, enter the administrator password at the
Admin Pwd
field (The default administrator
password is
“000000”
).
Step 6:
Click the
Connect
button. Please wait while it is connecting to the transmission unit. If
Transmission unit not found!
message is displayed, make sure that your cable connection
between the transmitter and your PC is well connected. You can close the configuration
program and redo step 4.
Step 7:
A
Completed(
[baud rate]
)
message box will be displayed. The transmitter default
information will be displayed at each field.
Step 8:
Configure the
Registration Checking
and
Video Mode
group settings. Leave the
Transmitter’s IP group with the default values.
Step 9:
You can
Enable
the Built-in Web Server so that you can see video through web browser
Step 10:
Ensure all settings are correct, then press the
Save and Exit
button
Step 11:
Please wait until it shows
Completed(
[baud rate]
)
message box, where
[baud rate]
shows
the serial port baud rate you are connecting between the PC and the transmitter. If
Transmission unit not found!
message is displayed, make sure that your cable
connection between the transmitter and your PC is well connected. And you can close the
configuration program and redo step 4.
Now you can close the configuration program, turn off the transmitter, remove the serial
cable and put it at any place you like.
Summary of Contents for VT3-16BA
Page 1: ...Transmission Unit Installation Guide...
Page 7: ......
