Teledyne T3LCR1002, User Manual, Page: 122 / 147

Command Reference
120
The CORRection:OPEN:STATe command sets the OPEN correction
function to ON or OFF.
Command
Syntax
CORRection:OPEN:STATe {ON,OFF or 1,0}
Parameter ON, 1 Set up the function is ON
OFF,0 Set up the function is OFF
Example SEND> CORR:OPEN:STATe ON<NL>
RET> null
Query Syntax CORRection:OPEN:STATe?
Query Response {on,off}
Example
SEND> CORR:OPEN:STATe?<NL>
RET>
on<NL>
The CORRection:OPEN:LCR command execute all preset OPEN correction
data measurement points (AC).
Command
Syntax
CORRection:OPEN:LCR
Example SEND> CORRection:OPEN:LCR<NL>
RET> LCR open<NL> // Run
pass/fail<NL> //Finish or Undone
The CORRection:OPEN:DCR command execute all preset OPEN correction
data measurement points (DC).
Command
Syntax
CORRection:OPEN:DCR
Example SEND> CORRection:OPEN:DCR<NL>
RET> DCR open<NL> // Run
pass/fail<NL> //Finish or Undone
The CORRection:SHORt command execute all preset SHORT correction
data measurement points.
Command
Syntax
CORRection:SHORt
Example SEND> CORRection:SHOR<NL>
RET> short<NL>
www. .com
information@itm.com 1.800.561.8187