Teledyne T3DMM6-5, User Manual

Page: 92 / 121

91
Limits
Limits function is available to indicate signals beyond ranges according to the
upper and lower parameters. The following are some measurement functions
which are able to do a limit operation: DC Voltage, AC Voltage, DC Current,
AC Current, Resistance, Frequency, Period, Capacitance and Temperature.
Press →
【
Limits
】
→
【
On
】
to enter the interface shown in the
following diagram.
Diagram 2- 44 Limits
Table 2- 11 Limits Measurement Menu Function Description
Function
Menu Settings Description
Limits On/Off Turn on or turn off the Limits function.
Low Set the desired lower limit.
Center Set the desired center value
High Set the desired upper limit.
Status Show the status of limit test.
Low Failures Show the times that reading is lower than the limit.
High Failures Show the times that reading is higher than the limit.
Span Set the desired span.
Beeper On/Off When the beeper is on, if the reading is lower or
higher than limits, the instrument will beep once.
Clear
Condition
Clear all current readings and restart to test.
Done Save all changes and return to the higher level
menu.