Teledyne T3DMM6-5, User Manual

Page: 86 / 121

85
Single Trigger
Single Trigger parameters that need to be set up include delay,
samples/trigger and VMC out.
Operating Steps:
1. Press , then select
【
Trg Src
】
→
【
Single
】
or press on the
front panel directly to enable Single Trigger.
2. Set the delay.
Press
【
Delay
】
to select Auto or Manual mode.
3. Set the number of samples or trigger.
Press
【
Samples/Trigger
】
to set sample count.
4. Set the VMC Out.
The Multimeter outputs a pulse signal through the VM COMP interface on
the rear panel after the sampling signal is finished.
Press
【
VMC Out
】
to choose Positive or Negative polarity.