Teledyne GT Series User Manual Download | Manualshive

Page: 2 / 66

background image

GT SERIES

1 INSTRUMENT, 7 APPLICATIONS

ii

67112

Revision 10

LEGAL STATEMENT

Teledyne, the Teledyne Logo, Gas Measurement Instruments, GMI, and GT Series are registered
and/or unregistered marks of Teledyne Gas Measurement Instruments Ltd, also referred to as "the
Company."

All rights reserved. No part of this documentation may be reproduced in any form or by any means or
used to make any derivative work (such as translation, transformation, or adaptation) without written
permission from the Company.

Microsoft, Windows, Windows 2000, Windows Me, Windows XP, Windows NT, Windows Vista,
Windows 7, Internet Explorer and MS-DOS are either trademarks or registered trademarks of
Microsoft Corporation in the United States and other countries. Solaris and JAVA are either
trademarks or registered trademarks of Sun Microsystems, Inc. All other products or service names are
the property of their respective owners.

DESCRIPTION

This User Guide provides information for use only with the GT Series Portable Gas Monitor (or “the
monitor”).

LIABILITY

Every care has been taken in the preparation of this user guide, but the Company does not accept
any responsibility for errors or omissions and their consequences. Information in this user guide is
subject to change without notice. This user guide does not constitute a specification or basis for a
contract.

MODIFICATION NOTICES

The Company aims to notify customers of relevant changes in the product operation and maintain this
user guide up to date. Due to continuous product improvement, there may be operational differences
between the latest product and this user guide.

This user guide is an important part of the monitor, and it should be referred to for the life of the
product.

SOFTWARE

Any software supplied must only be used in this product and may not be copied without the written
permission of the Company. Reproduction or disassembly of such embodied programs or algorithms is
prohibited. Ownership of such software is not transferable, and the Company does not warrant that
the operation of the software will be error free or that the software will meet the customer's
requirements.

WARNING: ALL INDIVIDUALS WHO, HAVE OR WILL HAVE,

RESPONSIBILITY FOR USING, MAINTAINING, OR SERVICING THIS

PRODUCT, MUST READ THIS ENTIRE MANUAL CAREFULLY. FAILURE TO

USE THIS EQUIPMENT PROPERLY COULD RESULT IN SERIOUS INJURY

OR DEATH.

«
1
2
3
4
...
»

Summary of Contents for GT Series



































































Reviews:

No comments

Related manuals for GT Series

Brand: Escort Pages: 4

Brand: Sensidyne Pages: 82

Series 3000 MkIII

Brand: Honeywell Pages: 45

Brand: Kellyco Pages: 3

Brand: Teknim Pages: 4

Brand: Treasure Locator Pages: 7

Brand: XENOX Pages: 5

Gold Tracker MD20

Brand: Falcon Pages: 3

Brand: Gemini Pages: 6

Brand: Trotec Pages: 2

STANDARD SERIES

Brand: Safeline Pages: 81

Brand: C-SCOPE Pages: 4

Brand: Wetekom Pages: 23

Brand: VIEWONHOME Pages: 2

Brand: Testboy Pages: 20

Brand: Gold Century Pages: 17

Brand: Beltronics Pages: 33

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands