19
67112
Revision 10
GT SERIES
1 INSTRUMENT, 7 APPLICATIONS
Figure 23: Barhole Sampling Types
1. To highlight the required option, press the UP
or DOWN
buttons.
2. To accept the highlighted option, press and hold OK button.
4.3.3.1. Timed Sampling
If timed sampling is selected, the user can set the barhole sample time as indicated in
.
Figure 24: Timed Mode (time selection)
1. To change the sample time, press the UP
or DOWN
buttons (alterable between 10
and 300 seconds).
2. Press and hold OK to accept.
3. The monitor performs an initial purge, as shown in
Figure 25: Purge
The purge can be stopped when the live readings reach zero; press and hold STOP button.
Note: Barhole mode of the monitor can be configured to have timed, non-timed or
both.
Note: If the monitor configuration does not allow user to change this sample time,
the pre-set value is displayed.
