Falcon GC
Maintenance & Troubleshooting
Teledyne Analytical Instruments
43
12.
Press the column module down into its fully seated position on
the mounting brackets. Attach the column module to the
brackets with the screws that were removed in Step 6 using a
3/32” hex driver.
13.
Fold a thin, flexible plastic strip into a “U” shape and insert it
sideways above the column end fitting inside the slot as shown.
Insert a foam plug in between the plastic ends and slide the foam
plug down snug with the column end connection.
Note: The plastic strip
acts a “shoehorn” to enable the foam plug
to slide easily and tightly against the column end
connection thereby minimizing air leakages. It is used to
protect the edges of the column plugs.
Summary of Contents for FALCON GC
