Falcon4 86M Cameras
Contents
57
AutoBrightness
OffsetY
autoBrightnessOffsetY
Sets the start of the area in the y direction
for pixels included in the color PRNU
Target average.(RW)
Is automatically increased if the OffsetY is
increased and has minimum value
2. This parameter increments in
multiples of 2
The autoBrightnessHeight may need to be
reduced before this value can be
increased.
autoBrightnessOffsetY <= Height
-4-autoBrightnessHeight.
AutoBrightness
OffsetX
autoBrightnessOffsetX
Sets the start of the area in the x direction
for pixels included in the color PRNU
Target average.(RW)
Has minimum value 0 and increments in
multiples of 32. Non multiples of 32 are
rounded down to the nearest multiple.
The autoBrightnessWidth may need to be
reduced to increase this value. The
minimum width is 64.
autoBrightnessOffsetX <= 10720-
autoBrightnessWidth.
AutoBrightness
Height
autoBrightnessHeight
Determines the number of rows to include
in the average used to set the PRNU
targets for color sensors.(RW)
The minimum autoBrightnessHeight is 4
rows and the maximum is Height-4. The
autoBrightnessheight is increased in
multiples of 2 and if an odd number is
entered, the entry will be rounded down
when possible. Also the
AutoBrightnessOffsetY may need to be
decreased before increasing this
parameter.
autoBrighitnessHeight =<Height-
2-autoBrightnessOffsetY
AutoBrightness
Width
autoBrightnessWidth
Determines the number of columns to
include in the average used to set the
PRNU targets for color sensors.(RW)
The minimum autoBrightnessWidth is 64
columns and the maximum is Width is
10720. The width is increased in multiples
of 32 and entries will be rounded down to a
multiple of 32. Also the
AutoBrightnessOffsetX may need to be
decreased before increasing this
parameter.
autoBrighitnessWidth <= 10720 -
autoBrightnessOffsetx
Flatfield
Calibration
Algorithm
flatfieldCorrectionAlgorithm
Selects the algorithm to use for calibration
of flat field PRNU coefficients. (RW)
DFNC
Beginner
