48
Contents
Falcon4 86M Cameras
Acquisition and Transfer Control Category
The acquisition and transfer control category, as shown by CamExpert, group acquisition and
transfer specific parameters.
Acquisition and Transfer Control Feature Descriptions
The following table describes these parameters along with their view attribute.
Display Name
Feature & Values
Description
Standard
& View
Acquisition Mode
AcquisitionMode
Acquisition mode of the camera.
Beginner
Continuous
Continuous
Frames are captured continuously until stopped
with the Acquisition Stop command.
Acquisition Status
AcquisitionStatus
This feature reports if the camera is currently
transmitting image data. < RO >
Beginner
Acquisition Start
AcquisitionStart
Starts the acquisition of the device. The number
of frames captured is specified by Acquisition
Mode feature.
Beginner
Acquisition Stop
AcquisitionStop
Stops the acquisition of the device at the end of
the current frame(s) sequence.
Beginner
Sensor Control Category
The camera sensor controls, as shown by CamExpert, group sensor specific parameters.
Sensor Control Feature Descriptions
The following table describes these parameters along with their view attribute.
Display Name
Feature & Values
Description
Standard
& View
Device Scan Type
DeviceScanType
Scan type of the sensor. < RO>
Beginner
Area scan
Areascan
2D area scan sensor.
Sensor Color Type
sensorColorType
Defines the camera sensor color type. < RO
>
Beginner
DFNC
Monochrome Sensor
Monochrome
Sensor color type is monochrome. (RO)
CFA Bayer Sensor
CFA_Bayer
Sensor color type is Bayer Pattern.(RO)
Sensor Width
SensorWidth
Defines the sensor width in active pixels.
< RO>
Expert
Sensor Height
SensorHeight
Defines the sensor height in active lines.
< RO>
Expert
