Falcon4 86M Cameras
Contents
7
Environmental Specifications
Table 5: Environmental Specifications
Specifications
Ranges
Storage temperature range
-20 °C to +80 °C
Humidity (storage and operation)
15% to 85% relative, non-condensing
MTBF (mean time between failures)
>100,000 hours, typical field operation
Sensor Cosmetic Specifications
The following table lists the current cosmetic specifications for the Teledyne DALSA sensor used in
the cameras.
Table 6: Blemish Specifications
Description
Definition
# of Defects
Column defect
A group of more than 20 contiguous pixels along a single column that deviate from the
neighboring columns by:
More than ±15% at 50% saturation with Flat-field correction ON and 1x gain.
More than 20% of saturation in dark and 1x gain.
6
Row defect
A group of more than 20 contiguous pixels along a single row that deviate from the
neighboring columns by:
More than ±15% at 50% saturation with Flat-field correction ON and 1x gain.
More than 20% of saturation in dark and 1x gain.
6
Cluster defect
A grouping of 2 to 16 inclusive defective pixels at a given test condition. A defective
pixel is defined as 20% of saturation output when sensor is dark and ± 15% away from
the average of the neighboring pixels of the same color measured at 20% to 80% of
maximum output in steps of 10%.
The maximum cluster defect size is 16.
34
Uncorrectable
single defective
pixel
At dark: Pixel level is elevated beyond 20% of saturation.
At 50% saturation: Pixel level is ±15% away from its neighboring pixels with FFC on.
15,000
1.
Cluster defects are separated by no less than one good pixel in any direction.
2.
Column and row defects are separated by no less than two good columns and rows respectively.
