46
Contents
Falcon4 86M Cameras
Device
Temperature
Selector
DeviceTemperatureSelector
Select the source where the temperature is
read. (RW)
1.00
Beginner
FPGA Board
FPGABoard
Read FPGA Board temperature.
Sensor Board
SensorBoard
Read sensor board temperature.
Sensor
Sensor
Read sensor temperature.
Device
Temperature
DeviceTemperature
Displays the device temperature in degrees
Celsius.
Depending on the host application (e.g.
GUI). This value is a polled value and may
automatically be updated every second.
Otherwise the value will only be updated
upon connection or when the Refresh
Temperature selector is pressed.
Beginner
Refresh
Temperature
readTemperature
Refreshes the temperature reading. (W)
Device Voltage
DeviceVoltage
The applied voltage to the image sensor.
(RO)
User Set Default
Selector
UserSetDefaultSelector
Selects the camera configuration set to
load and make active on camera power-up
or reset. The camera configuration sets are
stored in camera non-volatile memory.
(RW)
Beginner
Factory
Factory
Load factory-calibrated defaults.
UserSet1
to
UserSet 4
UserSet1
to
UserSet4
Select the user defined configuration
(UserSet1 to UserSet8) as the Power-up
Configuration.
User Set Selector
UserSetSelector
Selects the camera configuration set to
load feature settings from or save current
feature settings to. The Factory set
contains default camera feature settings.
User camera configuration sets contain
features settings previously saved by the
user. (RW)
Beginner
Factory Set
Factory
Select the default camera feature settings
saved by the factory.
User Set 1
to
User Set 4
UserSet1
to
UserSet4
Select the User Defined Configuration
space (UserSet1 to UserSet8) to save to or
load from features settings previously
saved by the user.
User Set Load
UserSetLoad
Loads the camera configuration set
specified by the User Set Selector feature,
to the camera and makes it active. (W)
Beginner
User Set Save
UserSetSave
Saves the current camera configuration to
the user set specified by the User Set
Selector feature. The user sets are located
on the camera in non-volatile memory.
Disabled when
flatfieldCorrectionMode
=
Calibration or
UserSetSelector
= Factory.
(W)
Beginner
Device Reset
DeviceReset
Resets the device to its power up state.
(W)
Beginner
