Teledyne ADFM Hot Tap, Installation And Operation Manual, Page: 113 / 116

Compliance Statements
CE Declar
ati
on of Conf
orm
ity
DECLARATION OF CONFORMITY
Application of Council Directive: 2004/108/EC -The EMC Directive
Manufacturer's Name: Teledyne Isco, Inc.
Manufacturer's Address: 4700 Superior, Lincoln, Nebraska 68504 USA
Mailing Address: P.O. Box 82531, Lincoln, NE 68501
Equipment Type/Environment: Laboratory Equipment for Light Industrial/Commercial Environments
Trade Name/Model No: Pro20 and Hot Tap Sensor
Year of Issue: 2007
Standards to which Conformity is Declared: EN 61326:1998 EMC Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use
Standard Description Severity Applied Performance Criteria
EN61000-4-2 Electrostatic Discharge Level 2 - 4kV contact discharge
Level 3 - 8kV air discharge C*
EN61000-4-3 Radiated RF Immunity 80 MHz to 1000MHz 80% AM at 1kHz
Level 1 – 10V/m B**
EN61000-4-4 Electrical Fast Transient Level 2 – 2kV on AC lines C***
EN61000-4-5 Surge on AC Lines 2kV L-Gnd, 1KV L-L C***
EN61000-4-6 Conducted RF on AC lines 150 kHz to 80 MHz,
3V rms, 80% modulated B**
EN61000-4-11 AC Dips and Short Interruptions 0.5 Cycle, each polarity/100% A
CISPR11/
EN 55011 RF Emissions Group 1, Class A Industrial, Scientific, and
Medical Equipment
Passes
EN61000-3-2, 3-3 Harmonic, Flicker Passes
*Unit is susceptible to ESD. In dry environments (<40% humidity), user must discharge themselves to earth before touching front
panel to prevent program lock-up.
**Unit’s flow sensor/cable is susceptible to RF. Unit must not be located near an RF source (radio/TV tower) to prevent erroneous
flow/depth measurements.
***Unit is susceptible to AC line transients and/or surges. If program lock-up occurs, unit’s wall mount power supply must be
connected to an AC power conditioner or operated on its internal batteries.
We, the undersigned, hereby declare that the design of the equipment specified above conforms to the above Directive(s) and
Standards as of July 5, 2007
William Foster
USA Representative
William Foster
Director of Engineering
Teledyne Isco, Inc.
4700 Superior Street
Lincoln, Nebraska 68504
Phone: (402) 464-0231
Fax: (402) 464-4543
60-7102-003
Rev. A